Raptor Telematics Downloads: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 17: Line 17:




 
=='''Troubleshooting'''==
 
 
 
 
 


'''Please follow the steps below to troubleshoot the connection:'''
'''Please follow the steps below to troubleshoot the connection:'''

Revision as of 14:26, 3 November 2017

Getting Started

Quickstart

User Manual

Summary


Telematics Hardware

Gold Telematics Hardware

  • ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL
Datasheet

Platinum Telematics Hardware

  • ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL
Datasheet


Troubleshooting

Please follow the steps below to troubleshoot the connection:

1. Verify that the IMEI on the back of the unit matches the portal configuration:

  • The IMEI can be found on the back of the unit:


2. Make sure that the unit’s antenna is properly connected and mounted in an area where it has a view of the sky. 3. Assure that the unit is in an area where there is cellular coverage.


4. Power up the unit, and check the LEDs:

  • We’d like to see that the cellular (GPRS) connects and the GPS gets a fix. This would be the green LED flashing for 2 seconds ON and 2 seconds OFF. The green LED sometimes looks more yellow than green.

5.Monitor the CAN bus connection. If working correctly, the telematics unit should transmit the following message:

0x19F0FF4A