Raptor Telematics Downloads: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Getting Started= | |||
'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Telematics/Telematics-Quickstart.pdf Quickstart]''' | '''[http://www.neweagle.net/support/wiki/ProductDocumentation/Telematics/Telematics-Quickstart.pdf Quickstart]''' | ||
| Line 7: | Line 7: | ||
=Telematics Hardware= | |||
===Gold Telematics Hardware=== | ===Gold Telematics Hardware=== | ||
*'''ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL''' | *'''ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL''' | ||
| Line 15: | Line 15: | ||
*'''ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL''' | *'''ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL''' | ||
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Telematics/TelematicsHardware_datasheet.pdf Datasheet]''' | :'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Telematics/TelematicsHardware_datasheet.pdf Datasheet]''' | ||
=Troubleshooting= | |||
'''Please follow the steps below to troubleshoot the connection:''' | |||
==='''1. Verify that the IMEI on the back of the unit matches the portal configuration:'''=== | |||
*'''The IMEI can be found on the back of the unit:''' | |||
[[File:TelematicsTroubleshootingImage2.png]] | |||
[[File:TelematicsTroubleshootingImage1.png]] | |||
===2. Make sure that the unit’s antenna is properly connected and mounted in an area where it has a view of the sky.=== | |||
===3. Assure that the unit is in an area where there is cellular coverage. === | |||
*'''The coverage map(s) can be found at: http://www.aeris.com/technology/aerconnect/coverage-map/#modal''' | |||
[[File:TelematicsTroubleshootingImage3.png]] | |||
===4. Power up the unit, and check the LEDs:=== | |||
*'''We’d like to see that the cellular (GPRS) connects and the GPS gets a fix. This would be the green LED flashing for 2 seconds ON and 2 seconds OFF. The green LED sometimes looks more yellow than green.''' | |||
[[File:TelematicsTroubleshootingImage4.png]] | |||
===5.Monitor the CAN bus connection. If working correctly, the telematics unit should transmit the following message:=== | |||
:'''0x19F0FF4A''' | |||
Revision as of 21:06, 2 November 2017
Getting Started
Telematics Hardware
Gold Telematics Hardware
- ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL
Platinum Telematics Hardware
- ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL
Troubleshooting
Please follow the steps below to troubleshoot the connection:
1. Verify that the IMEI on the back of the unit matches the portal configuration:
- The IMEI can be found on the back of the unit:
2. Make sure that the unit’s antenna is properly connected and mounted in an area where it has a view of the sky.
3. Assure that the unit is in an area where there is cellular coverage.
- The coverage map(s) can be found at: http://www.aeris.com/technology/aerconnect/coverage-map/#modal
4. Power up the unit, and check the LEDs:
- We’d like to see that the cellular (GPRS) connects and the GPS gets a fix. This would be the green LED flashing for 2 seconds ON and 2 seconds OFF. The green LED sometimes looks more yellow than green.
5.Monitor the CAN bus connection. If working correctly, the telematics unit should transmit the following message:
- 0x19F0FF4A