Raptor:CAN State

From NewEagleWiki
Jump to navigation Jump to search

Return to the main Raptor page

Return to CAN page

Raptor™ CAN State

Description

This block reports back the status of the specified CAN bus. It can be used to determine if the CAN bus is communicating properly or if error conditions exist.

Outputs

Output Type Description
CAN State int16 The status of the CAN bus. Offline = 0, Online = 1
Rx Count uint32 The number of CAN messages received on the CAN bus since the program started.
Tx Count uint32 The number of CAN messages transmitted on the CAN bus since the program started.
CAN State Unmasked uint32 The value the of the CAN bus error register unmasked. (This feature is only available on the GCM-80)

Parameters

Parameter Type Description
Hardware Resource Select The hardware interface to report the status of.
CAN Error Reg Output Checkbox Adds CAN State Unmasked output to block. (This feature is only available on the GCM-80)