IO Devices: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
Line 279: Line 279:
AX031500
AX031500
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://www.neweagle.net/product/magnetic-pick-up-can-converter-sae-j1939/ PURCHASE]'''
'''[https://store.neweagle.net/product/magnetic-pick-up-can-converter-sae-j1939/ Buy Now]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#Magnetic_Pick-Up_Sensor_to_CAN_Converter_.28SAE_J1939.29|Datasheet]]'''
'''[[System_Input_Modules_Downloads#Magnetic_Pick-Up_Sensor_to_CAN_Converter_.28SAE_J1939.29|Datasheet]]'''

Revision as of 13:23, 17 May 2018

Introduction

New Eagle carries or can build or CAN source Input / Output (IO) devices for your application. Please read below about current offerings or contact sales to discuss your needs.

Datasheet or user manual not available? Check out the Additional Downloads page or contact New Eagle Support.

System Input Modules

1 Universal Signal Input to CAN

The 1 Universal Signal Input Module measures 1 universal signal input (Voltage, Current, Resistive, Digital, Frequency, or PWM) and outputs the value over CAN. This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.
Picture Product Name Part Number Webstore More Information

1 Universal Signal
Input to CAN

AX030530

Buy Now

Datasheet

Protocol Converter
2 CAN ports
1 RS485 port

AX140X00

Please contact sales

Datasheet

10 Universal Signal Input to CAN

The 10 Universal Signal Input Module measures up to 10 analog inputs (0-5V, 0-20 mA or 4-20 mA) for connection to a variety of analog machine sensors or levers and sends the data to a CAN network. The user can also select multiple PWM or frequency inputs as well as a counter input. An active high digital input is another user selectable input.

Picture Product Name Part Number Webstore More Information

10 Universal Signal Input
CAN Controller

CANopen

AX030120

Buy Now

Datasheets

10 Universal Signal Input
CAN Controller

CANopen,
500 kbps

AX030120-01

Buy Now


10 Universal Signal Input
CAN Controller

CANopen,
1 Mbps

AX030120-02

Please contact sales


10 Universal Signal Input
CAN Controller

CAN (SAE J1939)

AX030121

Buy Now


18 Digital inputs Input to CAN

The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, Frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electroni control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.

Picture Product Name Part Number Webstore More Information

Coming Soon

18 Digital Signal Input
CAN Controller

SAE 1939,
500 kbps

AX030310-01

Buy Now

Datasheets

10 Universal Signal Input
CAN Controller

SAE J1939,
1 Mbps

AX030120-02

Please contact sales

10 Universal Signal Input
CAN Controller

CANopen

AX030311

Please contact sales

20 Channel Thermocouple Scanner

The Thermocouple Scanner monitors up to 20 thermocouple channels and the temperature information is provided to the engine control system over J1939(AXTC20) OR CANopen®(AXTC20CO). The scanner can flag low temperature warnings, high temperature warnings, or high temperature shutdowns to the engine control system. It will also detect and indicate open circuits on the sensor wires. Temperature is measured in ºC, with a 0.001ºC resolution. The Scanner is available in CANopen or J1939 CAN communication standards.

Picture Product Name Part Number Webstore More Information

Thermocouple Scanner
20 Thermocouple Channels
CAN, SAE J1939

AXTC20

Buy Now

Datasheets

Thermocouple Scanner
20 Thermocouple Channels
CANopen

AXTC20CO

Buy Now

RTD Scanner

The RTD Scanner monitors up to 8 channels of several types of RTDs. The temperature information is provided to an engine control system over a SAE J1939 or CANopen bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All 8 channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity and the RTD inputs are isolated from each other. The RTD temperature monitoring control features rugged packaging and watertight Deutsch IPD connectors. Applications include power generator sets.

Picture Product Name Part Number Webstore More Information

RTD Scanner
CAN, SAE J1939

AXRTD8

Please contact sales

Datasheets

RTD Scanner
CANopen

AXRTD8CO

Please contact sales

4 Channel Thermocouple to CAN

The Thermocouple Module monitors up to 4 channels of Type J, K or T thermocouples (others on request).

Picture Product Name Part Number Webstore More Information

Thermocouple Module
4 Channel

CAN (SAE J1939)

AXTC4

Buy Now

Datasheet

Thermocouple Module
4 Channel

CANopen

AXTC4CO

Please contact sales

Magnetic Pick-Up Sensor to CAN Converter (SAE J1939)

Converts a Magnetic speed sensor signal into SAE J1939 CAN Messages for communication with control systems.
Picture Product Name Part Number Webstore More Information

Magnetic Pick-Up Sensor to CAN Converter

AX031500

Buy Now

Datasheet

Dual Universal Signal Converter

The dual universal signal converter accepts two voltage, current, resistive, frequency, RPM, PWM or digital control signal inputs and converts them into two signal outputs (analog voltage, analog current or digital signal). The control can be networked to a SAE J1939 networked engine control system. The outputs are isolated from the inputs. The CAN bus port is isolated from both inputs and outputs.
Picture Product Name Part Number Webstore More Information

Dual Universal Signal Converter

AX130500

Buy Now

Datasheet

Isolated Signal Converter with CAN

A two channel signal converter with isolation and CAN bus is designed for diesel engine control systems, industrial automation, vehicle automation, and machine control integration. The signal converter accepts two analog current or voltage signals, resistive or digital inputs, PWM or frequency/RPM inputs and converts them into 2 analog, PWM, frequency or digital signal outputs. A +5V reference powers sensor inputs. The unit has 4-way isolation between power, inputs, outputs and CAN. The I/O control includes CAN bus automation for SAE J1939 12Vdc or 24Vdc control systems or CANopen networks. It can be installed in control panels, industrial control automation systems, power generator set control systems, off-highway equipment, construction machines, and test equipment.
Picture Product Name Part Number Webstore More Information

Isolated Signal Converter with CAN
SAE J1939

AX130510

Please contact sales

Datasheet

16 Analog I/O Module

The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
Picture Product Name Part Number Webstore More Information

16 Analog I/O Module
SAE J1939

AX030200

Buy Now

Datasheets

16 Analog I/O Module
CANopen

AX030201

Please contact sales

System Output Modules

CM0410 Input Output Module

The CM0410 is a general purpose input / output controller that includes a single J1939 CAN interface, 4 inputs, 1 high side current measurement pass-through, and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus. The CM0410 is a CAN slave module only and supports no standalone operation.

Picture Product Name Part Number Webstore Downloads

CM0410 Input Output Module
J1939

CM0410

Buy Now

Downloads

CAN Analog Signal Output Controllers

Picture Product Name Part Number Webstore Downloads

CAN Analog Signal Output Controller
J1939

AX030520

Buy Now

Datasheets

CAN Analog Signal Output Controller
CANopen

AX030521

Buy Now

11:9 CAN Controllers

Picture Product Name Part Number Webstore More Information

11:9 Controller
SAE J1939

AX031200

Buy Now

Datasheets

11:9 Controller
CANopen

AX031201

Buy Now

CAN to 10 Output Valve Controller

Available in 12, 24 and 48 volt operating input power modules, this durable CAN controlled output controller is capable of providing 10 universal outputs at up to 2.5 amps or 7 amps for the whole module. Applications include proportional valves, hotshot control profiles, PWM signals, and on/off valves. Settings may be user configured via windows based electronic assistant.

Picture Product Name Part Number Webstore Downloads

CAN to 10 Output
Valve Controller

CAN (SAE J1939)

AX021210

Buy Now

Datasheets

CAN to 10 Output
Valve Controller

CAN (SAE J1939),
500 kbps

AX021210-01

Buy Now

CAN to 10 Output
Valve Controller

CANopen

AX021211

Buy Now


CAN (J1939) to 4 Channel Analog Output

The IO device belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.

Picture Product Name Part Number Webstore Downloads

CAN to 4 Channel
Analog Output Device

250 kbps
(SAE J1939)

AX030500

Buy Now

Datasheets

CAN to 4 Channel
Analog Output Device

500 kbps

AX030502

Please contact sales

CANopen to 4 Channel Analog Outputs

The 4 Analog Signal Outputs CAN IO device belongs to a family of Axiomatic user-customizable smart controllers. The programmable internal architecture provides users with an ultimate flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using any commercially available CANopen® tools.

Picture Product Name Part Number Webstore More Information

CANopen to 4 Analog
Signal Outputs Device

AX030501

Buy Now

Datasheet

TC/Analog Input of CAN Controller

The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to a SAE J1939 based control system. Seven +5V references (10 mA) are provided to power the sensors. The 2 CAN ports are isolated from signal inputs and thermocouple inputs.

Picture Product Name Part Number Webstore More Information

TC/Analog Input of CAN Controller

AX18100

Buy Now

Datasheet

Connector Kit

AX070123

Buy Now

--

CAN Enabled Current Driver

The Single 5 amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU. this is a customizable solution that allows for custom logic or the use as a simple CAN based slave. Configuration and Service tools are available.

Picture Product Name Part Number Webstore More Information

CAN Enabled
Current Driver

(Custom)
Please contact sales

Built upon the
ECM S12-24
or the
ECM 563-48

--

Multiplexed Power Distribution Module (MPDM)

The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.

Picture Product Name Part Number Webstore Downloads More Information

Multiplexed Power
Distribution Module

MPDM-NE1

Purchase

Datasheets

More Details

MPDM-31M-300-0

Purchase

DC-DC Converter

The DC/DC converter is suitable for application on charging/cranking battery-based systems. Power from a vehicle battery is conditioned at the same voltage level and isolation is provided to protect onboard electronic devices.

Picture Product Name Part Number Webstore Downloads More Information

Axiomatic Isolated 24VDC/24VDC Converter

AX081530

Purchase

Datasheets

-

AX081530K
(with 2mm cable)

Purchase

Protocol Converters

2 SAE J1939, SAE J1587

Picture Product Name Part Number Webstore Downloads

Protocol Converter,
2 SAE J1939, SAE J1587

AX140400

Buy Now

Datasheet

Digital Keypads

4 Position Keypad

Hassle-free control and customization is literally at your fingertips. The Power Key is reconfigurable, readdressable and relegendable, requiring only a laptop or PC connection. Its secure-locking inserts (not included in purchase) can be interchanged to match the configuration.

Picture Product Name Part Number Webstore Downloads More Information

Powerkey Pro 4 Position CAN, Deutch Conn.

KEYPAD-DS-004-02

Please contact sales

-

-

8 Position Keypad

This standard keypad allows a designer to build a semi-custom system for a minimal cost. Each keypad is made from extremely high-quality and rugged silicone that can be laser etched with specified button legends, text or company logos. Communication protocols include RS485, J1030/J1939-11, CANopen and others.

Picture Product Name Part Number Webstore Downloads More Information

8-Position CAN Keypad

KEYPAD-DS-008-02

Purchase

Datasheet

-

Note: CAN DBC file available upon request

11 Switch Keypad

The 11 switch keypads is a CAN input output device for vehicle multiplexing. It can not only output user action, but can be configured via CAN messages. Template:KEYPAD-011-00


Specialty IO Modules

4 Channel Strain Gauge to CAN Controller

The 4 Channel Strain Gauge CAN controller accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/- 19.5 mV to +/- 2.5 Vdc. It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is 2.5 scans per second and the update rate is 400 ms for all 4 channels. Standard embedded software is provided. Rugged IP67 rated packaging and a power supply input of 12Vdc or 24Vdc nominal suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.

Picture Product Name Part Number Webstore More Information

4 Channel Strain Gauge to CAN Controller
SAE J1939

AX200000

Please contact sales

Datasheet

J1772 Vehicle Power Interface Module (VPIM)

The J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or plug-in Hybrid Electric vehicle charging equipment in accordance with the SAE J1772 specifications. It allows the vehicle systems and ECUs that require a low current "sleep" mode to be managed externally and monitors the inputs, providing an output that will drive an external "Wake Up" relay which, in turn, provides power to the connected systems.

Picture Part Number Webstore Downloads More Information

VPIM-024-1301

Purchase

Downloads

More Details

PWM to Analog Converter (Pedal Emulator)

The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture Product Name Part Number Webstore More Information

PWM to Analog Converter
(Pedal Emulator)

PWM-AN-024-1403

Buy Now

More Details

Electronic Assistant

The Electronic Assistant® is a software configuration tool that runs on the Windows operating system and is connected to a J1939 bus via an USB to CAN converter, AX070501. Upon being connected to the bus, the EA will find all IO Devices on the bus and recognize those manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic IO device for the desired performance over a wide variety of applications.

Picture Product Name Part Number Webstore More Information

Electronic Assistant

AX070502

Buy Now

Datasheet

Electronic Assistant and Canopen

Axiomatic offers CANopen ready modules that do not require the Axiomatic Electronic Assistant software configuration tool.

The parameters in Axiomatic CANopen products can be read or written through any standard CANopen tool that can access an ECU's Object Dictionary. In addition to the User Manual, Axiomatic also provides Electronic Data Sheets (EDS) with all their CANopen ECUs, as per the standard "CiA DSP 306 V1.3, Electronic Data Sheet Specification for CANopen (EDS).

Axiomatic User Manuals

To view detailed user manuals for axiomatic products click here Password: trillium

Discontinued Products

Picture Product Name Part Number Replacement
10 ANALOG INPUT MODULE, SAE J1939 AX030100 AX030120
10 ANALOG INPUT MODULE, CANOPEN AX030101 AX030121