Autonomous Systems

From NewEagleWiki
Jump to navigation Jump to search

New Eagle > Products Wiki > Autonomous System Products


Introduction

New Eagle develops and supplies kits & components to Autonomous Systems development. The most common offer is the Raptor line of controllers starting with the GCM196 as a Drive By Wire (DBW) interface between the AI "Brain" and the vehicle or actuator system.

DBW Kits

insert Pacifica here

DBW HW Controller Options

GCM-1793-196-1503 (GCM196)

Processor Inputs Outputs Communications Operating Voltage

260 MHz Infineon Tricore TC1793

45

45

3 CAN, 1 LIN

6-16VDC

Picture Part Number Webstore Downloads More Information

GCM-1793-196-1503

Purchase

Datasheet

More Details

BCM-5646-48-1404 (BCM48)

Processor Inputs Outputs Communications Operating Voltage

120 MHz Freescale
MPC 5646

20

15

4 CAN, 4 LIN, 1 Ethernet

9-16VDC

Picture Part Number Webstore Downloads More Information

BCM-5646-48-1404

Please contact sales

Datasheet

More Details

Displays

Raptor VeeCAN 800

The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.

Picture Part Number Webstore Downloads More Information

DISP-VC800-1402

Purchase

Datasheet
Programming Guide
Custom Data Logger Guide

More Details
Display Examples

Pedal Emulator

PWM-AN-024-1403

The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture Product Name Part Number Webstore More Information

PWM to Analog Converter
(Pedal Emulator)

PWM-AN-024-1403

Buy Now

More Details

Gen 2 pedal emulator

Power Management

12V Sensor Power

The New Eagle™ Multiplexed Power Distribution Module (MPDM) offers a device to simplify powering of sensors and intelligent fuse function. The MPDM is controlled and provides diagnostic information over CAN.

Picture Product Name Part Number Webstore Downloads More Information

Multiplexed Power
Distribution Module

MPDM-NE1

Purchase

Datasheets

More Details

MPDM-31M-300-0

Purchase

Additional DC power for computing racks

Sevcon DC/DC Converters
The 1.2WK DC/DC converters is suitable to provide additional DC power for autonomous rack computers. New Eagle engineering can assist in its installation and integration in your vehicle.


Picture Part Number Webstore Downloads More Information

SEV-GEN5-DCDC-001

Please contact sales

Datasheet

More Information

Additional AC power for computing racks

400V DC to 120/240V AC Inverter
The 350INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 240 to 430 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.

Picture Part Number Webstore Downloads More Information

BEL-350INV60-120-240-9G

Purchase

Datasheet

More Details

Sensors

Contact Us

For Drive-By-Wire kit options or for more information, please contact sales@neweagle.net.