Engine Control: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
(24 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Engine Controls}}
{{DISPLAYTITLE:Engine Control Systems}}
{{Navigation}} '''Engine Controls'''
{{Navigation}} '''Engine Control'''
[[File:EnginePic.jpg|400px|right]]
[[File:EnginePic.jpg|400px|right]]


Line 8: Line 8:
From software development to hardware selection to full system integration, New Eagle has extensive experience with engine control systems. Please see the information below on New Eagle's ECM software offering, control module options, and other engine-related components. As always, New Eagle's experienced application engineers are capable of providing engineering services and project support on whatever level is needed.
From software development to hardware selection to full system integration, New Eagle has extensive experience with engine control systems. Please see the information below on New Eagle's ECM software offering, control module options, and other engine-related components. As always, New Eagle's experienced application engineers are capable of providing engineering services and project support on whatever level is needed.


Please visit [https://www.neweagle.net/engine-systems/ '''this page'''] from the New Eagle website for more information on New Eagle's engine control systems capabilities, as well as a few case studies demonstrating prior experience and project success.
Please visit [https://www.neweagle.net/engine-control/ '''this page'''] from the New Eagle website for more information on New Eagle's engine control systems capabilities, as well as [https://neweagle.net/case-studies/ '''this page'''] for a few case studies demonstrating prior experience and project success.


== Software ==
== Engine Control Software ==
{|  
{|  
|style = "width:850px;"|
|style = "width:850px;"|
Line 36: Line 36:
'''Please contact [mailto:sales@neweagle.net sales]'''
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[http://www.neweagle.net/ProductDocumentation/NewEagleSoftware/ECM/BaseECMSoftware_DataSheet.pdf Datasheet]'''
'''[[ECM_Software_Downloads | Datasheet]]'''
|}
|}


== Engine Control Modules ==
== Engine HW Controller Options ==
New Eagle offers several modules specifically designed for engine control:<br/>
New Eagle offers several modules specifically designed for engine control:<br/>
*The most-capable Raptor ECM is the [[Controllers#ECM-1793-196-1503_.28ECM196.29 | '''ECM196''']].
*The most-capable Raptor ECM is the [[Controllers#ECM-1793-196-1503_.28ECM196.29 | '''ECM196''']].
*The most-capable MotoHawk ECM is the [[Controllers#ECM-5554-112_.28PCM112.29 | '''PCM112''']].
*The most-capable MotoHawk ECMs are the [[Controllers#ECM-5554-112_.28PCM112.29 | '''PCM112''']] and the [[Controllers#SECM70 | '''SECM70''']].
Please visit [[Controllers#Engine_Control_Modules_.28ECM.29 | '''this page''']] to see the full lineup of MotoHawk-compatible ECMs, including 48pin, 70pin, and 128pin variants.
Please visit [[Controllers#Engine_Control_Modules_.28ECM.29_2 | '''this page''']] to see the full lineup of MotoHawk-compatible ECMs, including 48pin, 70pin, 80pin, 112pin, and 128pin variants.


== Sensors & Actuators ==
== Sensors & Actuators ==
Line 56: Line 56:


== I/O Devices ==
== I/O Devices ==
New Eagle offers numerous I/O devices that may be useful for engine control applications, such as:<br/>
New Eagle offers numerous I/O devices that may be useful as instrumentation during development, such as:<br/>
*[[IO_Devices#10_Universal_Signal_Input_to_CAN | '''10 Universal Signal Inputs to CAN Module''']]
*[[IO_Devices#10_Universal_Signal_Input_to_CAN | '''10 Universal Signal Inputs to CAN Module''']]
*[[IO_Devices#4_Channel_Thermocouple_to_CAN | '''4 Channel Thermocouple to CAN''']]
*[[IO_Devices#4_Channel_Thermocouple_to_CAN | '''4 Channel Thermocouple to CAN''']]
Line 66: Line 66:
== Other Hardware Products ==
== Other Hardware Products ==


===AIM - Advanced Ignition Module===
===Stand-Alone Gasoline Engine Control Module===
The AIM 500 is easy to install and will work on most stationary or transient engine platforms. It is a digital controller with fully calibrateable software.
This controller is capable of operating as a stand-alone ECM for an engine with a gasoline fuel system, port injection, coil per cylinder, and an electronic throttle body.
Digital Display
(-40F to 158F)
The AIM 500 Is a production ready solution. If you have additional requirements, get in touch with us and we can customize it to your needs.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
Coming Soon
!scope="col"|Picture 
!scope="col"|Part Number         
!scope="col"|'''Webstore'''
!scope="col"|Downloads
!scope="col"|More Information
|-
|style = "height:180px; width:180px;"|
[[File:Ignition Control Module.png|150px]]
|style = "height:180px; width:180px;"|
''(Custom)''
|style = "height:180px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:180px; width:180px;"|
'''[[AIM_500#Downloads|Datasheet]]'''
|style = "height:180px; width:180px;"|
'''[[AIM 500|More Details]]'''
|}
===Stand-Alone Diesel & GDI Engine Controller===
This controller is capable of operating as a standalone engine management unit for a variety of vehicles and engines. The i7 modules are specially designed to work with direct injection SI and CI engines. This module also offers several emission control features; extensive pressure and temperature inputs, control outputs for EGR valve and 4 knock sensor inputs for combustion analysis.
'''[http://www.neweagle.net/contact.html Contact sales]''' for firmware updates
{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"


Line 107: Line 78:


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "width:180px;" rowspan="3"|
[[file:NIRA_I7.jpg|150px|]]
|style = "width:180px;"|
|style = "width:180px;"|
ECM-NIRA i7x-1301
[[file:SECM70.jpg|150px|]]


|style = "width:180px;"|
|style = "width:180px;"|
[http://store.neweagle.net/products-by-application/engine-controls/products/nira-engine-control-module-for-gasoline-injection.html Buy Now]
'''Please contact [mailto:sales@neweagle.net sales]'''


|style = "width:180px;" rowspan="3"|
'''[[NIRA#Downloads|Drawing]]'''
'''[[NIRA#Downloads|CADDrawing]]'''
'''[[NIRA#Downloads|Overview]]'''
'''[[NIRA#Downloads|Pin Overview]]'''
|style = "width:180px;" rowspan="3"|
'''[[NIRA|More Details]]'''
|- style="vertical-align:middle;"
|style = "width:180px;"|
|style = "width:180px;"|
ECM-NIRA i7rs-1301
'''Please contact [mailto:sales@neweagle.net sales]'''


|style = "width:180px;"|
|style = "width:180px;"|
[http://store.neweagle.net/products-by-application/engine-controls/products/nira-engine-control-module-for-diesel-solenoid-injection.html Buy Now]
'''Please contact [mailto:sales@neweagle.net sales]'''


|- style="vertical-align:middle;"
|style = "width:180px;"|
|style = "width:180px;"|
ECM-NIRA i7rp-1301
|style = "width:180px;"|
[http://store.neweagle.net/products-by-application/engine-controls/products/nira-engine-control-module-for-diesel-piezo-injection.html Buy Now]
|}
=== Cam and Crank 2-Channel Arbitrary Waveform Generator ===
The New Eagle Cam and Crank 2-Channel Arbitrary Waveform Generator is designed to simulates low frequency, digital Cam and Crank signals. These signals can be calibrated using MotoTune Software to fit any Cam and Crank combination. The included harnesses are designed specifically for the simulation of these Cam and Crank Signals.
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col"|Picture 
!scope="col"|Part Number         
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|More Information
|-
|style = "height:150px; width:180px;"|
[[file:Cam_and_Crank_Scope.jpg|150px]]
|style = "height:150px; width:180px;"|
ASM-C&C2C-AWG-A01<br>
ASM-C&C2C-AWG-S01
|style = "height:150px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:150px; width:180px;"|
'''[[Cam_and_Crank_2-Channel_Arbitrary_Waveform_Generator#Downloads|Summary Page]]'''
'''[[Cam_and_Crank_2-Channel_Arbitrary_Waveform_Generator#Downloads|User Manual]]'''
|style = "height:150px; width:180px;"|
'''[[Cam and Crank 2-Channel Arbitrary Waveform Generator|More Details]]'''
|}
|}


Line 194: Line 117:


|style="width:180px;" rowspan="3"|
|style="width:180px;" rowspan="3"|
'''[http://www.neweagle.net/contact.html Contact Sales]'''
'''Please contact [mailto:sales@neweagle.net sales]'''


|style="width:180px;" rowspan="3"|
|style="width:180px;" rowspan="3"|
'''[[NIRA|Injector Driver Product Page]]'''
'''[[NIRA|More Details]]'''


|-style="vertical-align:middle;"
|-style="vertical-align:middle;"

Revision as of 12:33, 12 May 2018

New Eagle > Products Wiki > Engine Control

Introduction

From software development to hardware selection to full system integration, New Eagle has extensive experience with engine control systems. Please see the information below on New Eagle's ECM software offering, control module options, and other engine-related components. As always, New Eagle's experienced application engineers are capable of providing engineering services and project support on whatever level is needed.

Please visit this page from the New Eagle website for more information on New Eagle's engine control systems capabilities, as well as this page for a few case studies demonstrating prior experience and project success.

Engine Control Software

New Eagle’s Base ECM Software enables rapid engine control development. The software comes initially configured with common I/O and strategies, but is architected for easy customization to customer requirements. This solution avoids a blank-sheet starting point: the base model contains control strategies validated over years of projects and represents New Eagle’s state-of-the-art engine control know-how.

The offering constitutes of four parts:

  1. Base ECM Software
  2. Torque Path Add-On
  3. J1939/OBD Tasks Add-On
  4. OBD Major Monitors Add-On

Please see the datasheet in the link below for more detailed information.

Picture Part Number Webstore Downloads

Please contact sales

Please contact sales

Datasheet

Engine HW Controller Options

New Eagle offers several modules specifically designed for engine control:

Please visit this page to see the full lineup of MotoHawk-compatible ECMs, including 48pin, 70pin, 80pin, 112pin, and 128pin variants.

Sensors & Actuators

New Eagle offers several sensors and actuators commonly found on engines, such as:

Please visit the Sensors and Actuators page to see the full selection.

I/O Devices

New Eagle offers numerous I/O devices that may be useful as instrumentation during development, such as:

Please visit the I/O Devices page to see the full selection.

Other Hardware Products

Stand-Alone Gasoline Engine Control Module

This controller is capable of operating as a stand-alone ECM for an engine with a gasoline fuel system, port injection, coil per cylinder, and an electronic throttle body.

Picture Part Number Webstore Downloads More Information

Please contact sales

Please contact sales

Please contact sales

Please contact sales

Diesel & Direct Injection Driver System

New Eagle supplies a diesel (solenoid or piezo) and gasoline (DI) injector product line for use with MotoHawk or other engine control development tools. This injector driver is built upon a production diesel engine controller meaning it is rugged and available for volume production.

Picture Part Number Webstore Datasheet More Information

ASM-NIRA-i7rs-DRVR

Buy Now

Please contact sales

More Details

ASM-NIRA-i7rp-DRVR

Buy Now

ASM-NIRA-i7x-DRVR

Buy Now

Contact Us

For questions or more information, please contact sales@neweagle.net.