Engine Control: Difference between revisions

Revision as of 19:14, 16 December 2016

New Eagle > Products Wiki > Engine Controls

Introduction

From software development to hardware selection to full system integration, New Eagle has extensive experience with engine control systems. Please see the information below on New Eagle's ECM software offering, control module options, and other engine-related components. As always, New Eagle's experienced application engineers are capable of providing engineering services and project support on whatever level is needed.

Software

New Eagle’s Base ECM Software enables rapid engine control development. The software comes initially configured with common I/O and strategies, but is architected for easy customization to customer requirements. This solution avoids a blank-sheet starting point: the base model contains control strategies validated over years of projects and represents New Eagle’s state-of-the-art engine control know-how.

The offering constitutes of four parts:

Base ECM Software
Torque Path Add-On
J1939/OBD Tasks Add-On
OBD Major Monitors Add-On

Please see the datasheet in the link below for more detailed information.

Picture	Part Number	Webstore	Downloads
	Please contact sales	Please contact sales	Datasheet

Engine Control Modules

New Eagle offers several modules specifically designed for engine control:

The most-capable Raptor ECM is the ECM196.
The most-capable MotoHawk ECM is the PCM112.

Please visit this page to see the full lineup of MotoHawk-compatible ECMs, including 48pin, 70pin, and 128pin variants.

Sensors & Actuators

New Eagle offers several sensors and actuators commonly found on engines, such as:

Please visit the Sensors and Actuators page to see the full selection.

I/O Devices

New Eagle offers numerous I/O devices that may be useful for engine control applications, such as:

Please visit the I/O Devices page to see the full selection.

Other Hardware Products

AIM - Advanced Ignition Module

The AIM 500 is easy to install and will work on most stationary or transient engine platforms. It is a digital controller with fully calibrateable software. Digital Display (-40F to 158F) The AIM 500 Is a production ready solution. If you have additional requirements, get in touch with us and we can customize it to your needs.

Coming Soon

Picture	Part Number	Webstore	Downloads	More Information
	(Custom)	Please contact sales	AIM500 Datasheet	AIM 500

Stand-Alone Diesel & GDI Engine Controller

This controller is capable of operating as a standalone engine management unit for a variety of vehicles and engines. The i7 modules are specially designed to work with direct injection SI and CI engines. This module also offers several emission control features; extensive pressure and temperature inputs, control outputs for EGR valve and 4 knock sensor inputs for combustion analysis.

Contact sales for firmware updates

Part Number	Webstore	Downloads	More Information
ECM-NIRA i7x-1301	Buy Now	Drawing CADDrawing Overview Pin Overview	Stand-Alone NIRA
ECM-NIRA i7rs-1301	Buy Now
ECM-NIRA i7rp-1301	Buy Now

Cam and Crank 2-Channel Arbitrary Waveform Generator

The New Eagle Cam and Crank 2-Channel Arbitrary Waveform Generator is designed to simulates low frequency, digital Cam and Crank signals. These signals can be calibrated using MotoTune Software to fit any Cam and Crank combination. The included harnesses are designed specifically for the simulation of these Cam and Crank Signals.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-C&C2C-AWG-A01 ASM-C&C2C-AWG-S01	Please contact sales	Summary Page User Manual	Cam and Crank 2-Channel Arbitrary Waveform Generator

Diesel & Direct Injection Driver System

New Eagle supplies a diesel (solenoid or piezo) and gasoline (DI) injector product line for use with MotoHawk or other engine control development tools. This injector driver is built upon a production diesel engine controller meaning it is rugged and available for volume production.

Part Number	Webstore	Datasheet	More Information
ASM-NIRA-i7rs-DRVR	Buy Now	Contact Sales	Injector Driver Product Page
ASM-NIRA-i7rp-DRVR	Buy Now
ASM-NIRA-i7x-DRVR	Buy Now

@@ Line 1: / Line 1: @@
+{{DISPLAYTITLE:Engine Controls}}
+{{Navigation}} '''Engine Controls'''
+[[File:EnginePic.jpg|400px|right]]
 == Introduction ==
 {|
 |style = "width:850px;"|
-New Eagle Engineers have plenty of experience and constant interaction with engine control systems. They are able to provide customers with support and control system solutions including system design, development, and integration tools and processes. New Eagle engineering services cover controls, production, software testing, component and hardware selection and development, user interface devices, and long term customer support.
+From software development to hardware selection to full system integration, New Eagle has extensive experience with engine control systems. Please see the information below on New Eagle's ECM software offering, control module options, and other engine-related components. As always, New Eagle's experienced application engineers are capable of providing engineering services and project support on whatever level is needed.
+== Software ==
+{|
+|style = "width:850px;"|
+New Eagle’s Base ECM Software enables rapid engine control development. The software comes initially configured with common I/O and strategies, but is architected for easy customization to customer requirements. This solution avoids a blank-sheet starting point: the base model contains control strategies validated over years of projects and represents New Eagle’s state-of-the-art engine control know-how.
+The offering constitutes of four parts:<br/>
+# Base ECM Software<br/>
+# Torque Path Add-On<br/>
+# J1939/OBD Tasks Add-On<br/>
+# OBD Major Monitors Add-On
+Please see the datasheet in the link below for more detailed information.
+{|class="wikitable" style="text-align: center;" cellpadding = "5"
+!scope="col"|Picture
+!scope="col"|Part Number
+!scope="col"|'''Webstore'''
+!scope="col"|Downloads
+|-
+|style = "height:180px; width:180px;"|
+[[Image:EVSupervisorCode.jpg|150px]]
+|style = "height:180px; width:180px;"|
+'''Please contact [mailto:sales@neweagle.net sales]'''
+|style = "height:180px; width:180px;"|
+'''Please contact [mailto:sales@neweagle.net sales]'''
+|style = "height:180px; width:180px;"|
+'''[http://www.neweagle.net/ProductDocumentation/NewEagleSoftware/ECM/BaseECMSoftware_DataSheet.pdf Datasheet]'''
+|}
+== Engine Control Modules ==
+New Eagle offers several modules specifically designed for engine control:<br/>
+*The most-capable Raptor ECM is the [https://www.neweagle.net/support/wiki/index.php?title=Controllers#ECM-1793-196-1503_.28ECM196.29 ECM196].
+*The most-capable MotoHawk ECM is the  [https://www.neweagle.net/support/wiki/index.php?title=Controllers#ECM-5554-112_.28PCM112.29 PCM112].
+Please visit [https://www.neweagle.net/support/wiki/index.php?title=Controllers#Engine_Control_Modules_.28ECM.29 this page] to see the full lineup of MotoHawk-compatible ECMs, including 48pin, 70pin, and 128pin variants.
+== Sensors & Actuators ==
+New Eagle offers several sensors and actuators commonly found on engines, such as:<br/>
+*[https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators#Pressure_Sensors Pressure Sensors]
+*[https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators#Temperature_Sensors Temperature Sensors]
+*[https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators#Electronic_Throttle_Controller Electronic Throttle Controller]
+*[https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators#Fuel_Injectors Fuel Injectors]
+*[https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators#MotoTron_Ignition_Coil Smart Ignition Coil]
+Please visit the [https://www.neweagle.net/support/wiki/index.php?title=Sensors-and-Acutators Sensors and Actuators page] to see the full selection.
+== I/O Devices ==
+New Eagle offers numerous I/O devices that may be useful for engine control applications, such as:<br/>
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#10_Universal_Signal_Input_to_CAN 10 Universal Signal Inputs to CAN Module]
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#4_Channel_Thermocouple_to_CAN 4 Channel Thermocouple to CAN]
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#16_Analog_I.2FO_Module 16 Analog I/O to CAN Module]
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#CAN_.28J1939.29_to_4_Channel_Analog_Output CAN (J1939) to Analog Out (4-channel)]
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#Multiplexed_Power_Distribution_Module_.28MPDM.29 Multiplexed Power Distribution Module (MPDM)]
+*[https://www.neweagle.net/support/wiki/index.php?title=IO_Devices#Electronic_Foot_Pedals Foot Pedal]
+Please visit the [https://www.neweagle.net/support/wiki/index.php?title=IO_Devices I/O Devices page] to see the full selection.
+== Other Hardware Products ==
-== Engine Control Products ==
 ===AIM - Advanced Ignition Module===
 The AIM 500 is easy to install and will work on most stationary or transient engine platforms. It is a digital controller with fully calibrateable software.
@@ Line 81: / Line 140: @@
 [http://store.neweagle.net/products-by-application/engine-controls/products/nira-engine-control-module-for-diesel-piezo-injection.html Buy Now]
 |}
-==Engine Controls Development ==
-===MotoHawk Engine Control Libraries ===
-The MotoHawk tool chain provides templates for various engine control applications.  these libraries are intended to save you time in the creation of your own system.  These libraries include:
-:* GM 4L80E Transmission Controller
-:* Compression Ignition Base (Diesel) Engine Controller
-:* Spark Ignition Base Gasoline  Engine Control
-:* Knock Controller with Band Pass Filter
-:* MAP Based Camless Sync
-:* Misfire Detection Monitor
-:* Post O2 Control
-:* Stepper Motor Controller
-:* Torque Based Control for Spark Ignition Engine
-:* Wide Band O2 Sensor Controller (Narrow Band for the ECM-5554-112 Controller)
-:* Variable Cam Timing Interpretation
-:*'''[http://store.neweagle.net/products-by-application/engine-control-systems/engine-controls-development.html Webstore: Engine Control]'''
-Engine control is only one category of MotoHawk Application libraries. '''[[MotoHawk_Control_Solutions#MotoHawk_Application_Libraries|Click Here]]''' for a complete list.
-=== Thermocouple to CAN Scanner ===
-If you are using thermocouples to record engine temperatures for exhaust, winding temperature, fluids, etc. and need a thermocouple scanner, New Eagle’s Axiomatic solution can work for you.  The Axiomatic Thermocouple Scanner has 20 channels of several types of Thermocouples  and outputs the information via J1939 or CANOpen.
-{{AXTC20}}
-{{AXTC20CO}}
 === Cam and Crank 2-Channel Arbitrary Waveform Generator ===
@@ Line 177: / Line 211: @@
 '''[http://store.neweagle.net/assembly-gasoline-direct-injection-driver-and-software.html Buy Now]''' <br>
 |}
-==Components==
-New Eagle offers a variety of components for engine control, the typical ones are listed below. For more products information, please visit
-* [http://www.neweagle.net/support/wiki/index.php?title=Controllers Controllers]
-* [http://www.neweagle.net/support/wiki/index.php?title=Data_Loggers Data Loggers]
-* [http://www.neweagle.net/support/wiki/index.php?title=Display_Solutions Displays]
-* [http://www.neweagle.net/support/wiki/index.php?title=IO_Devices Input/Output Devices]
-* [http://www.neweagle.net/support/wiki/index.php?title=Components Sensors and Actuators]
-===Controllers===
-'''ECM-5554-112 (PCM112)'''
-Features Include
-*MPC 5554 80 MHz
-*Operating voltage: 9-16 VDC
-*Operating Temperature: -40°C to 105°C
-{{ECM-5554-112}}
-===Data Loggers===
-'''New Eagle Low-Cost CAN Data Logger '''
-The logger utilizes standard SD cards for data storage making it easy to retrieve data for applications including Event Data Logging (EDR). This device is capable of logging at rates of 1ms, making it an ideal choice for any CAN bus environment. Built in key switch detection and keep-alive circuitry ensure clean shutdowns and proper file closures.
-{{NETM-CDL-001}}
-''' New Eagle Raptor Data Logger '''
-This logger utilizes a USB stick for data storage and effortless data retrieval. Two CAN channels are provided, preconfigured to 250K and 500k, with logging at rates up to 1ms to make this device is an ideal choice for most CAN bus environments. While the unit can function without user intervention, an interface button is provided to allow for multiple logging sessions. This data logging device can survive in the harshest environments due to its robust components.
-{{ASM-VC320DL-01}}
-===Displays===
-''' VeeCAN 320 '''
-{{VeeCAN 320}}
-===Sensor Actuators===
-'''MotoTron Gasoline Fuel Injector'''
-MotoTron short-body 60 lb/hr (10.7 gm/sec) Siemens fuel injector.  Please '''[http://www.neweagle.net/contact.html Contact Sales]''' for the characterization of the injector.
-{{INJ-GAS-002-00}}
-'''Bosch CNG Fuel Injector'''
-The Bosch NGI2 injector is available.  Please '''[http://www.neweagle.net/contact.html Contact Sales]''' for more information.
-{{INJ-NGI2-001}}
-=Engineering Services=
-New eagle offers engineering services and support to assist you with your engine controls design and application.  '''[http://store.neweagle.net/engineering-services.html Engineering Services]'''
-[[file:Engserv3a.jpg|180px]]<br>
-= Contact Us =
-For questions or more information, please contact [mailto:sales@neweagle.net sales@neweagle.net]