Display Solutions
From NewEagleWiki
New Eagle offers a number of displays spanning a broad range of form-factors. Most of the displays can integrate easily with systems created using the MotoHawk development tool suite, but they can also be used in a standalone manner with existing systems that contain CAN and Serial protocols such as J1939 and J1587. To make a custom application for a display it could be programmed by the customer, or by an experienced engineer at New Eagle. If you wish to have a custom display programmed, fill out the Display Project Specifications sheet and contact New Eagle. Display Project Specifications
Contents |
KAntrak
The KAntrak display line from Kongsberg Automotive is a series of rugged LCD display panels that can either run standard engine monitor software, or our Applications team can design a custom solution. Options for the KAntrak line include an internal heater for extreme low temperature applications, and CSA certification. A software SDK is also available for those who want to design programs (in C) for the display.
 KAntrak 1700, A rugged 3"x3" LCD display. It comes with GEM (Generic Engine Monitor) installed as standard. |
 KAntrak 2700, A rugged 4"x4" LCD display. |
 KAntrak 2710, A rugged 4"x4" LCD display with built-in heater for extreme low-temperature operation. |
 KAntrak 2710 CSA, A rugged 4"x4" LCD display with built-in heater for extreme low-temperature operation, and CSA approval documentation. |
More Information
Datasheets
KAntrak Datasheets (Also contains KAntrak 1700 Datasheet/ GEM manual)
Webstore
VeeThree Instruments
The CANvu displays from Veethree Instruments are similar to the KAntrak, but provide a more visually appealing color display. Again, they can either run standard engine monitor software or our Applications team can create a custom solution. A software SDK is also available for those who want to design programs (in C) for the display. CANvu is transitioning to a more functional display VeeCAN 320 sold by the same company, VeeThree Instruments. See below for more information on VeeCAN 320.
Veethree Instruments also offers other discrete gauges and a GPS Speedometer used for measuring ground speed and headings. The GPS Speedo is available in various styles for many different applications.
 CANvu 400 a rugged 3.8"x3.8" color LCD display, 400 nits brightness |
 CANvu 800 a rugged 3.5"x3.5" color LCD display, 800 nits brightness |
 VeeCAN320 3.8" color display, sunlight readable with I/O features |
 GPS Speedometer is a 3.5" round gauge available in many styles |
More Information
More Information: VeeThree Instruments
Webstore
Webstore: CANvu VEM 400N
Webstore: CANvu VEM 800N
MiniView
The MiniView is a small rugged gauge that is designed to operate in harsh marine and off-highway applications. It is nice to replace classic 2" gauges, and it comes with a MotoHawk library for quick programming.
 MiniView, a small rugged gauge display |
More Information
Datasheets
Webstore
Webstore: MiniView (ASM-GAGE-001)
New Eagle BlueTooth-Can Interface Kit
The New Eagle BlueTooth-Can Interface Kit is a set of hardware parts and software that is designed for wireless real-time monitoring from a control module to a mobile device or tablet. The kit includes a user-defined PID (Parameter ID) set, a Bluetooth™ adapter with a harness, and a Motohawk® OBDII software library that reads and assigns PIDs dynamically according to the OBD Protocol. The New Eagle OBDII handler service tool is configured to monitor data from a Motohawk control module and other devices that follow OBDII protocol.
This product can be used for any of the controllers that New Eagle offers.
